Cartographer 3D

Welcome
🗺️Cartographer Probe
🚠Cartographer CNC Mount
- 🚧Installation
🌪️Linear Motor
- 🗓️Coming Soon

Powered by GitBook

On this page

Katapult

PreviousSwitching between CAN and USB Operation (v3 only)NextFirmware

Last updated 4 months ago

You may want to build your own version of Katapult, currently Katapult doesn't support the stm32f042 at 24mhz.

Download our build of Katapult below.

Cartographer v2 and v3 (stm32f042 based probes).

USB

The USB version requires the following settings.

CAN

The CAN version requires the following settings.

https://github.com/Cartographer3D/katapult