Next Steps - Configuration and Calibration
Finding the Serial or UUID
Note, you need to replace the serial path or UUID with your probes serial path or UUID, this can be found by running the following commands
For USB based probes
For CAN based probes
Take note of either the Serial ID or the UUID.
New Firmware
Since late August, most probes shipping from directly from Cartographer3D, and a majority of our resellers have pre-flashed with the Cartographer Survey Firmware.
If your box or antistatic bag states "Survey Touch Ready", please go here
πSurvey TouchIf it doesnt, don't worry. You can update your probe using our flashing tool. If you want to configure it as is, please go to the next page.
Last updated